Submit articles, press releases
Mustang Exhaust - Professional Upgrade Tips
by: articlesbytotus
Total views: 18
Word Count: 462
In terms of popularity, upgrading the exhaust of a Mustang is second only to replacing the wheels. It doesn't matter if you are changing out the mid-pipes or replacing the whole system --when you own a Mustang, you want the exhaust system to last and sound good. To get these results, you will need to improve and/or replace the components of your exhaust. What are the different components of the mustang exhaust?
There is more to the mustang exhaust system than just pieces of metal bolted together. Your mustang exhaust performs many functions, the most important ones are the following. They move the hot exhaust gases coming from your engine out of the car. They limit the noise output and reduce exhaust emissions. The faster you are able increase the air flow through the engine the better overall performance you will have and the exhaust is integral this.
How does the exhaust accomplish this? It is accomplished by pushing the gases that come from the engine through the pipes and muffler, on its way out of the car. There are three components in the mustang exhaust system. Every Mustang has the same set-up, no matter when it was made. I recommend strongly that you upgrade the headers and change to cat-back exhaust, which will not only improve your performance, but also the sound level and fuel efficiency often times.
Manifolds are the first component and are attached to the engine exhaust ports. Exhaust gasses are funneled through the manifolds from the cylinders into the mid-pipe, which is the single exhaust passage for all cylinders. Mustang headers are synonymous with manifolds and although they perform the same functions, they do not work in exactly the same way. Headers normally have curved tubes joining the exhaust ports to the exhaust pipe while the several holes of the manifold converge into a common chamber. Both systems prevent the gasses from slamming through the ports, channeling them instead in a gentle flow into the pipe.
The next component, which is something included in each and every mustang exhaust, is the mid-pipe. when the gases depart the manifold, this is where they go. Equalization of exhaust pulses is the main purpose of having this. They are bursts of exhaust from the engine to the pipe, which allows the engine to produce more power while also helping the system run more efficiently.
The third component is called the mustang catback. The catback bolts on at the back of the catalytic converters. The assembly consists of the mufflers and the tailpipes. This is the final destination of the vicious gases from your engine. There are several aftermarket performance updates associated with headers, exhaust, and intake that are available. Your best source can be found by clicking the links within this article or resource box.
About the Author
Manifolds are the first component of the system and are attached to the engine exhaust ports. Mustang exhaust gasses are funneled through the manifolds from the cylinders into the mid-pipe, which is the single exhaust passage for all cylinders. Mustang headers are synonymous with manifolds, and although they perform the same functions, they do not work in exactly the same way. Headers normally have curved tubes joining the exhaust ports to the exhaust pipe while the several holes of the manifold converge into a common chamber. Another crucial component is the mustang catback.
Rating: Not yet rated